Engine Mounting Brackets Market – Global Industry Size, Share, Trends, Opportunity, and Forecast, Segmented By Type (Inline Engines, V-Type Engines), By Application (Passenger Cars, Commercial Vehicles), By Region & Competition, 2021-2031F

Forecast Period	2027-2031
Market Size (2025)	USD 6.75 Billion
CAGR (2026-2031)	5.12%
Fastest Growing Segment	Passenger Cars
Largest Market	Asia Pacific
Market Size (2031)	USD 9.11 Billion

Market Overview

The Global Engine Mounting Brackets Market will grow from USD 6.75 Billion in 2025 to USD 9.11 Billion by 2031 at a 5.12% CAGR. Engine mounting brackets are structural components designed to secure the powertrain to the vehicle chassis, functioning to dampen vibrations, minimize noise transmission, and maintain critical alignment under dynamic driving conditions. The primary driver supporting market growth is the consistent expansion of global automobile production, which creates a direct and non-discretionary demand for reliable fixation systems across passenger and commercial segments. Additionally, stringent regulatory mandates regarding fuel economy are compelling manufacturers to adopt high-strength, lightweight materials such as aluminum and composites for these components, fundamentally expanding the market value beyond traditional steel applications.

However, a significant challenge impeding broad market expansion is the accelerated transition toward electric vehicles, which typically utilize fewer mounting points and simpler configurations compared to complex internal combustion engines. This structural shift threatens to reduce the total volume of brackets required per unit. Illustrating the current baseline for component demand, according to the International Organization of Motor Vehicle Manufacturers (OICA), in 2024, the global automotive industry produced nearly 92.5 million motor vehicles, underscoring the massive continuing requirement for these integration solutions despite evolving powertrain technologies.

Key Market Drivers

The primary factor propelling the Global Engine Mounting Brackets Market is the Expansion of Global Automotive Production and Sales, which creates direct demand for structural fixation components. As manufacturing volumes surge in major industrial hubs, the need for precision-engineered brackets to secure powertrains scales linearly. This trajectory is exemplified by China, a key manufacturing base; according to the China Association of Automobile Manufacturers (CAAM), December 2025, automotive production for the January-November 2025 period reached 31.23 million units, an 11.9% year-on-year increase. This regional activity supports broader global figures, where, according to the European Automobile Manufacturers’ Association (ACEA), in September 2025, global passenger car production grew by 3.5% in the first half of the year to reach 37.7 million units.

Simultaneously, the market is driven by the Accelerated Transition to Electric and Hybrid Vehicle Architectures, which necessitates specialized mounting solutions. Although battery-electric platforms may utilize fewer mounting points, the proliferation of complex hybrid systems—requiring brackets for both engines and motors—and the need for lightweight materials to offset battery mass sustain high-value component demand. The velocity of this shift is critical; according to the International Energy Agency (IEA), May 2025, in the 'Global EV Outlook 2025', worldwide electric car sales were projected to exceed 20 million units for the year. This substantial volume compels manufacturers to develop advanced alloy brackets that meet the rigorous NVH standards of modern electrified transport.

Download Free Sample Report

Key Market Challenges

The accelerated transition toward electric vehicles presents a structural impediment to market revenue growth by fundamentally altering the volume and complexity of required fixation components. Unlike internal combustion engines, which generate significant vibration and require multiple heavy-duty mounting points to stabilize the engine and transmission, electric powertrains are inherently smoother and more compact. This architectural shift allows automotive engineers to utilize fewer, lighter, and less complex mounting brackets per unit. Consequently, as assembly lines convert to electrified platforms, the average content value per vehicle for mounting systems declines, creating a contraction in component demand that offsets gains from overall vehicle production increases.

This reduction in component volume is intensifying as electric mobility captures a larger share of the global automotive landscape. The rapid displacement of traditional powertrains creates a scenario where bracket manufacturers face shrinking demand relative to total vehicle output. Highlighting the scale of this migration, according to the International Energy Agency, in 2024, global electric car sales exceeded 17 million units. This substantial market penetration by vehicles requiring simplified mounting configurations directly erodes the baseline demand for traditional, high-volume bracketry, forcing suppliers to contend with lower per-unit volumes even as the broader automotive sector continues to expand.

Key Market Trends

The Application of Additive Manufacturing for Complex Geometries is fundamentally reshaping bracket production by enabling the creation of topology-optimized structures that traditional casting cannot achieve. This manufacturing evolution allows engineers to consolidate multi-part assemblies into single, high-strength units that significantly reduce weight while maintaining critical structural integrity. The scale of this industrial adoption is accelerating rapidly as major automakers integrate 3D printing into their core development workflows to solve ergonomic and lightweighting challenges. Illustrating this operational shift, according to General Motors, January 2025, in the 'GM uses Additive Manufacturing to bring 3D printed innovation to products and plants' article, the company executed over 5,400 new additive manufacturing projects in 2024 alone, underscoring the massive implementation of this technology for creating specialized production aids and components.

Simultaneously, the Shift Toward Sustainable and Recyclable Material Sourcing is transforming the supply chain as OEMs aggressively target Scope 3 emission reductions through the procurement of green metals. This trend forces bracket suppliers to transition from virgin ore extraction to high-quality recycled feedstocks without compromising the mechanical performance required for powertrain fixation. Validating this move toward circular economy principles within critical structural components, according to Constellium, October 2024, in the 'Constellium showcases its leading aluminium solutions at ALUMINIUM 2024' press release, the manufacturer displayed advanced systems produced from over 90% post-consumer scrap. This development demonstrates the commercial viability of high-recycled-content alloys for demanding automotive applications previously reserved for primary aluminum.

Segmental Insights

Based on insights from trusted market research, the Passenger Cars segment is currently recognized as the fastest-growing category within the Global Engine Mounting Brackets Market. This rapid expansion is primarily driven by the escalating global production of passenger vehicles coupled with rising consumer demand for enhanced ride quality and cabin silence. Consequently, automotive manufacturers are increasingly adopting advanced mounting solutions to strictly minimize Noise, Vibration, and Harshness (NVH) levels. Furthermore, stringent fuel efficiency and emission standards set by regulatory bodies like the Environmental Protection Agency (EPA) are compelling the industry to transition toward lightweight composite and aluminum brackets, further fueling development and demand in this segment.

Regional Insights

Asia Pacific dominates the Global Engine Mounting Brackets Market, primarily driven by its standing as the world's largest hub for automotive manufacturing. High production volumes in China, India, and Japan are supported by the robust presence of original equipment manufacturers and established supply networks. The region benefits from accessible raw materials and favorable production costs, which incentivize high-volume component assembly. Additionally, rapid infrastructure development and industrial growth fuel the continuous demand for heavy commercial vehicles and passenger cars, further solidifying the region's market leadership.

Recent Developments

• In May 2025, Sumitomo Riko Company Limited exhibited its latest innovations at the Automotive Engineering Exposition 2025, held in Yokohama, Japan. The company showcased a variety of advanced products centered on the themes of carbon neutrality and next-generation mobility, including high-performance insulation materials and systems. The exhibit featured their cutting-edge rubber and resin technologies designed to enhance vehicle safety and comfort by effectively managing vibrations and heat in modern powertrains. This participation underscored Sumitomo Riko's continuous focus on developing sophisticated solutions for the evolving requirements of the global automotive market.
• In March 2025, BOGE Rubber & Plastics, a major supplier of vibration control technology, commenced the construction of a new production facility in Niš, Serbia. The German company announced that the new plant would significantly expand its manufacturing footprint in Europe, with plans to employ several hundred workers in the initial phase. The facility was designed to produce a range of automotive components, potentially including engine mounts and chassis parts, to meet the growing demand from European automakers. This expansion highlighted the company's commitment to strengthening its global production network and ensuring proximity to key automotive customers.
• In October 2024, Anhui Zhongding Sealing Parts Co., Ltd. forged a global strategic partnership with Celanese Corporation, a global technology leader in chemical specialty materials. The collaboration focused on multiple product lines, including high-performance elastomers and engineering plastics used in sealing, fluid handling, and NVH damping applications. This agreement aimed to leverage advanced material science to enhance the performance and durability of automotive components, including those used in vibration control and mounting systems. The partnership was established to drive innovation in lightweighting and material efficiency for next-generation vehicle platforms.
• In June 2024, Vibracoustic, a leading global automotive noise, vibration, and harshness (NVH) expert, launched a new Thermal Management Decoupling System designed for electric vehicles. This innovative system included dedicated bracket designs developed to securely mount and isolate the bundled thermal management components from the vehicle chassis. The solution addressed the challenge of mounting complex thermal units in battery electric vehicles by ensuring optimum isolation and reducing the transmission of vibrations. The company emphasized that this development would support manufacturers in streamlining assembly processes while improving overall vehicle refinement and passenger comfort.

Key Market Players

• Vibracoustic SE
• ZF Friedrichshafen AG
• Continental AG
• CRRC New Material Technologies GmbH
• Hutchinson S.A.
• Sumitomo Riko Company Limited
• EMP Tech Co.,Ltd.
• Sigma Global INC.
• CTR Co.,Ltd.
• Toyo Tire Corporation

By Type	By Application	By Region
Inline Engines V-Type Engines	Passenger Cars Commercial Vehicles	North America Europe Asia Pacific South America Middle East & Africa

Report Scope:

In this report, the Global Engine Mounting Brackets Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

• Engine Mounting Brackets Market, By Type:

• Inline Engines
• V-Type Engines

• Engine Mounting Brackets Market, By Application:

• Passenger Cars
• Commercial Vehicles

• Engine Mounting Brackets Market, By Region:

• North America
• United States
• Canada
• Mexico
• Europe
• France
• United Kingdom
• Italy
• Germany
• Spain
• Asia Pacific
• China
• India
• Japan
• Australia
• South Korea
• South America
• Brazil
• Argentina
• Colombia
• Middle East & Africa
• South Africa
• Saudi Arabia
• UAE