Surgical Scissors Market - Global Industry Size, Share, Trends, Opportunity, and Forecast, Segmented by Type (Reusable, Disposable), By Material Type (Tungsten, Stainless Steel, Titanium, Ceramic, Others), By Application (Cardiology, Orthopedics, Gastroenterology, Dermatology, Neurology, Others), By End User (Hospitals & Clinics, Ambulatory Care Centers, Others), By Region and Competition, 2020-2030F

Market Overview

Global Surgical Scissors Market was valued at USD 405.23 million in 2024 and is expected to reach USD 601.21 million by 2030 with a CAGR of 6.80% during the forecast period. The global market for Surgical Scissors is experiencing significant growth, driven by the rising surgical procedure in dermatology, chronic diseases like cancer. Additionally, growing demand for both plastic surgery for long hours and small surgical scissors for detailed and precise procedures, have significantly increased the demand for surgical scissors worldwide. Additionally, the growing geriatric population across the globe, which is susceptible to different kinds of chronic diseases, is further expected to increase the demand for surgical scissors, thereby fuelling the market growth through 2030. Besides, growing development of different surgical scissors based on their diverse uses by leading companies is further expected to support the surgical scissors market during the forecast period.

Furthermore, the growing prevalence of different type injuries such as burn injuries and sport injuries is further expected to increase the demand for surgical scissors, thereby supporting the market growth. Additionally, according to the Centre for Diseases Control and Prevention, in 2020, about 600,000 women in the United States have hysterectomy every year, about 460,000 United States residents have a cholecystectomy, and 1.3 million pregnant women seek C-section in the United States.

Key Market Drivers

Rising Volume of Global Surgical Procedures

The global demand for surgical scissors is rising in tandem with the increasing number of surgical procedures performed worldwide. According to the World Health Organization (WHO), over 234 million major surgeries are conducted each year, driven by aging populations, trauma cases, and the management of chronic diseases like cancer, cardiovascular disorders, and orthopedic issues. This massive volume of procedures directly fuels demand for precision instruments such as surgical scissors.

Many of these surgeries occur in ambulatory surgical centers (ASCs), which are increasingly favored due to their cost-effectiveness and efficiency. In the U.S. alone, ASCs performed around 23 million surgeries in 2019, generating approximately USD 35 billion in revenue. Each surgical procedure requires high-quality scissors, often with features that reduce infection risk and enhance reliability under sterilization protocols. Consequently, as surgical volumes continue to rise globally—with both hospitals and ASCs increasing their procedural capacity—the need for surgical scissors naturally expands.

Aging Population and Chronic Disease Burden

The aging global population is substantially contributing to the growth of the surgical scissors market. The UN estimates that by 2050, the population aged 60 and over will exceed 2 billion, a marked rise from current levels. Elderly individuals often experience chronic conditions such as cardiovascular disease, arthritis, and cancer, necessitating a higher rate of surgical interventions. In the U.S., for example, around 48.3 million surgeries were performed in 2021, increasing to 51.2 million in 2023. Similarly, the EU has seen a 28% increase in minimally invasive (MIS) procedures between 2021 and 2023. Since elderly patients frequently undergo complex surgeries, precision instruments like surgical scissors are crucial. This demographic trend translates into sustained and growing demand for surgical tools.

Download Free Sample Report

Key Market Challenges

High Cost of Advanced Instruments

A key challenge inhibiting market penetration is the high cost of advanced surgical scissors made from premium materials or with enhanced features. Scissors incorporating titanium, ceramic coatings, or robotic compatibility come at significantly higher prices than standard stainless-steel instruments. In low- and middle-income countries, such tools are often beyond available budgets, forcing healthcare providers to rely on less costly, lower-quality alternatives. Even in developed nations, stringent procurement processes and budget constraints within public health systems may limit adoption, despite the equipment’s long-term benefits. Moreover, compliance with regulatory frameworks—such as the EU’s Medical Device Regulation (MDR 2017/745)—adds certification and compliance costs that further elevate initial investments.

Regulatory and Sterilization Compliance Burden

Another significant challenge is navigating strict regulatory requirements and sterilization protocols. Surgical scissors are classified as medical devices and must satisfy rigorous safety, quality, and performance standards set by regulatory agencies like the U.S. FDA and EU MDR. Reusable instruments must withstand repeated sterilization without degradation—a process that demands validation in each healthcare setting. Disposable instruments, by contrast, require components that tolerate manufacturing, packaging, and sterilization while meeting strict single-use criteria. Ensuring consistent regulatory compliance across different geographic regions, each with its own approval processes—can delay product introductions and increase costs, especially for smaller manufacturers. The need for harmonized standards remains a persistent barrier to market expansion.

Key Market Trends

Shift Toward Advanced, Durable, and Smart Materials

One major trend is the shift toward surgical scissors crafted from advanced materials and featuring smart design enhancements. Newer scissors utilize titanium alloys, tungsten carbide inserts, ceramic coatings, and nano-surface treatments to improve sharpness, corrosion resistance, and durability. These materials help maintain instrument performance over repeated sterilizations—especially important for reusable variants that reduce medical waste. Disposable scissors are also evolving, equipped with non-stick coatings to prevent tissue adherence and support sterile one-time use. The rise of robotic surgery has further driven demand for miniaturized and highly precise scissors compatible with robotic platforms. Hospitals and surgical centers are now seeking ergonomically optimized tools that satisfy both performance and sterilization standards.

Growing Use of Disposable Instruments in Outpatient Settings

A strong trend in the surgical scissors market is the increased adoption of disposable (single-use) instruments, especially in ambulatory surgical centers (ASCs) and outpatient clinics. These facilities prefer disposable tools to ensure consistent sterility, eliminate reprocessing time, and prevent cross-contamination.

In the U.S., ASCs have expanded significantly, performing millions of procedures annually and saving healthcare systems billions each year—specifically, ASCs save an estimated USD 40 billion annually compared with hospital-based surgeries. The increasing focus on infection control, especially post-pandemic, has driven demand for disposable scissors that meet sterilization standards and user safety. This dynamic is particularly strong in low- and middle-income countries where single-use tools reduce sterilization infrastructure burdens.

Segmental Insights

Type Insights

Based on Type, the reusable category holds the largest market share in the global surgical scissors market, primarily due to its durability, long-term cost-efficiency, and alignment with sustainability practices in healthcare. Hospitals and surgical centers around the world increasingly favor reusable surgical scissors because they can be sterilized and used repeatedly without compromising performance or safety. These instruments are typically made from high-quality materials such as stainless steel or tungsten carbide, which allow them to withstand repeated sterilization cycles while maintaining their sharpness and precision.

Reusable surgical scissors also offer consistent tactile feedback and ergonomic design features that make them especially suitable for complex and lengthy surgical procedures. Their reliability and ability to perform under strict clinical standards make them an essential tool across a variety of surgical specialties. Furthermore, reusable options support hospitals’ goals of reducing medical waste and minimizing environmental impact. This has become a growing priority as healthcare systems worldwide work to meet sustainability benchmarks and comply with stricter waste management regulations.

Download Free Sample Report

Regional Insights

Based on the region, North America lead the Global Surgical Scissors Market, owing to its advanced healthcare infrastructure, high volume of surgical procedures, and strong emphasis on quality and safety standards. The region encompasses a vast network of hospitals, outpatient surgical centers, and specialty clinics that demand high-precision surgical instruments. Surgeons and healthcare providers prioritize tools made with premium materials like stainless steel and tungsten carbide, designed to withstand rigorous sterilization processes and frequent use.

The region’s dominance is fueled by a combination of demographic trends and healthcare practices. An aging population brings a higher incidence of chronic conditions that often require surgical intervention—from cardiovascular repairs to joint replacements—driving steady demand for surgical scissors. Additionally, a significant volume of elective and minimally invasive procedures, performed in both hospital and ambulatory settings, ensures ongoing market stability and growth.

Healthcare systems in North America also benefit from robust regulatory frameworks and reimbursement policies that encourage the adoption of high-quality surgical tools. While these instruments may come at a higher cost, their performance, reliability, and safety justify their use. Furthermore, a strong domestic manufacturing base, combined with continuous technological innovations (such as ergonomic designs and smart scalpel-integrated scissors), helps cement North America’s leading position in the global surgical scissors landscape.

Recent Developments

• In February 2024, the London School of Biomedical Engineering & Imaging Sciences officially opened its new Manufacturing Facility for Active Implants and Surgical Instruments (MAISI), dedicated to advancing the development and production of cutting-edge surgical tools and implantable technologies.
• In January 2024, Solvay, a leading provider of advanced materials, announced a collaboration with the French start-up Ostium on a joint initiative aimed at enabling the mechanical recycling of end-of-life single-use surgical instruments. This project marks a significant step toward improving sustainability and reducing medical waste in surgical settings.
• In November 2023, Surtex unveiled its Infinex surgical instrument series at the MEDICA trade fair, showcasing a state-of-the-art range designed to address diverse surgical needs. This innovative series emphasizes precision and efficiency, underscoring Surtex’s ongoing commitment to excellence and technological advancement in the field of medical devices. The Infinex Maestro line features expertly engineered micro scissors, forceps, and needle holders—crafted to deliver superior performance and contribute to improved patient outcomes.
• In September 2023, Charmant made a notable return to the EANS 2023 Congress held in Barcelona, Spain, in partnership with the IQ Group. During the event, the company presented its newest developments in surgeon-focused technologies. These included hybrid micro-scissors, advanced surgical support systems, and a wide array of accessories, reflecting Charmant’s focus on innovation and enhancing surgical precision.In January 2025, Lotte Biologics inaugurated a new facility in the United States to provide comprehensive, end-to-end services for antibody-drug conjugate (ADC) development and manufacturing.

Key Market Players

• Becton, Dickinson, and Company
• Stryker Corporation
• B.Braun Melsungen AG
• Teleflex, Inc.
• Olympus Corporation
• Arthrex, Inc.
• Encision Inc.
• Scanlan International, Inc.
• World Precision Instruments, Inc.
• Richard Wolf GmbH

Report Scope:

In this report, the Global Surgical Scissors Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

• Surgical Scissors Market, By Type:

o   Reusable

o   Disposable

• Surgical Scissors Market, By Material Type:

o   Tungsten

o   Stainless Steel

o   Titanium

o   Ceramic

o   Others

• Surgical Scissors Market, By Application:

o   Cardiology

o   Orthopedics

o   Gastroenterology

o   Dermatology

o   Neurology

o   Others

• Surgical Scissors Market, By End User:

o   Hospitals & Clinics

o   Ambulatory Care Centers

o   Others

• Surgical Scissors Market, By Region:

o   North America

§  United States

§  Mexico

§  Canada

o   Europe

§  France

§  Germany

§  United Kingdom

§  Italy

§  Spain

o   Asia-Pacific

§  China

§  India

§  South Korea

§  Japan

§  Australia

o   South America

§  Brazil

§  Argentina

§  Colombia

o   Middle East and Africa

§  South Africa

§  Saudi Arabia

§  UAE

Competitive Landscape

Company Profiles: Detailed analysis of the major companies presents in the Global Surgical Scissors Market.

Available Customizations:

Global Surgical Scissors Market report with the given market data, TechSci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

• Detailed analysis and profiling of additional market players (up to five).

Global Surgical Scissors Market is an upcoming report to be released soon. If you wish an early delivery of this report or want to confirm the date of release, please contact us at [email protected]