Power Cutter Market - Global Industry Size, Share, Trends, Opportunity, and Forecast, Segmented By Power Type (Gas-powered, Battery-powered, Electric-powered, Pneumatic-powered, Hydraulic-powered), By Cutter Type (Ring cutters, Chain cutters), By Application (Residential, Commercial, Industrial), By Region, and By Competition, 2020-2030F

Market Overview

The Global Power Cutter Market was valued at USD 6.07 Billion in 2024 and is expected to reach USD 7.70 Billion by 2030 with a CAGR of 3.88% during the forecast period.

The global power cutter market spans across diverse end-use sectors, including construction, manufacturing, automotive, aerospace, shipbuilding, and residential applications. These tools are essential for precise cutting of concrete, metal, stone, and composite materials, supporting various industrial and infrastructural operations. Power cutters come in a variety of forms—gas-powered, electric (corded and cordless), battery-operated, hydraulic, and pneumatic—each tailored to different operational needs. Among them, gas-powered units remain dominant due to their strength and suitability for heavy-duty outdoor applications. However, battery-powered cutters are gaining rapid popularity owing to their convenience, zero emissions, and ability to operate without cords or hoses.

North America leads the market in terms of technological adoption and safety regulations, while the Asia-Pacific region is witnessing the fastest growth driven by urbanization, industrial expansion, and massive infrastructure projects. In these emerging markets, increased disposable income and government-led construction investments are fueling demand. Within the industrial segment, high-capacity and rugged cutters are in high demand, while commercial and residential sectors are leaning toward compact, efficient, and easy-to-use variants.

Innovation is a key differentiator in this market. Manufacturers are integrating brushless motors, digital controls, IoT capabilities, and ergonomic designs to enhance user comfort, safety, and operational efficiency. Cordless models are particularly favored for their reduced setup time, maneuverability, and low maintenance. In rescue operations and industrial emergencies, hydraulic and electric cutters equipped with smart sensors and real-time performance monitoring are increasingly used.

Sustainability is also playing a vital role, with a visible shift toward electric and battery-powered alternatives to reduce carbon emissions and noise pollution. Moreover, integrated dust suppression systems and vibration reduction features are being prioritized to comply with evolving safety standards. The distribution landscape has become increasingly omnichannel, with customers accessing products through both e-commerce and specialized retail outlets.

Overall, the global power cutter market continues to expand, driven by rapid urbanization, technological advancements, and rising demand for safer and more efficient cutting solutions. Key players are focusing on R&D, strategic collaborations, and regional expansion to strengthen their market presence. As industries continue to automate and infrastructure investment accelerates globally, the demand for high-performance, sustainable, and smart cutting solutions is expected to remain strong.

Key Market Drivers

Growth in Construction & Infrastructure

The growth of global infrastructure and construction activities is one of the most significant drivers of the power cutter market. Rising urbanization, commercial development, and government-backed infrastructure investments are directly increasing the demand for heavy-duty cutting tools. Countries across Asia, the Middle East, and Africa are investing in transportation, energy, housing, and industrial projects. These developments require large-scale concrete and metal cutting tasks, often executed using high-capacity power cutters.

The increasing number of mega infrastructure projects, including highways, bridges, metro systems, and airports, is creating a steady demand for industrial-grade cutters. In many emerging economies, the annual growth rate of new residential construction has been consistently rising, with more than 60% of new urban buildings requiring on-site mechanical cutting solutions. Additionally, high-rise and smart city developments demand both heavy-duty and compact electric cutters for detailed tasks.

In commercial real estate, the rising number of office buildings, malls, and hospitality centers is pushing demand for compact, efficient, and portable cutting tools. The adoption of prefabricated construction practices also adds to the need for precise cutting equipment, as materials must be cut to exact dimensions before assembly.

In the renovation and repair segment, growing investments in infrastructure upgrades and retrofitting of aging structures are increasing the use of lightweight power cutters. The growing preference for efficient and labor-saving tools has pushed both public and private sector contractors to invest in advanced equipment.

Across developed markets, where safety and speed are crucial, power cutters with reduced noise, vibration, and dust are favored. In contrast, in developing markets, the need for cost-effective and robust gas or electric cutters remains high. Overall, the expansion of global infrastructure and construction is a consistent and long-term driver of the power cutter industry.

Shift Toward Battery & Electric Tools

The global transition toward battery-powered and electric tools is reshaping the dynamics of the power cutter market. This shift is being driven by growing environmental awareness, stricter emission regulations, and a need for more user-friendly, low-maintenance equipment. Battery-powered cutters are increasingly preferred in both developed and developing markets for their mobility, reduced noise, and zero exhaust emissions.

Modern lithium-ion battery technology has dramatically improved performance, enabling cutters to operate for extended periods while maintaining power levels comparable to gas models. Around 70% of new cordless models introduced in recent years now come with fast-charging capabilities, allowing full recharge in under an hour. Additionally, nearly 60% of users report a preference for cordless tools in job sites with limited space or ventilation.

Cordless electric cutters also offer enhanced safety by eliminating the need for cables and hoses, reducing trip hazards and simplifying handling. Over 50% of construction companies now integrate battery-powered tools in indoor applications, where gas-powered tools are restricted due to fumes. The total cost of ownership for electric cutters is also lower, as they require less frequent servicing and have fewer mechanical parts to replace.

Innovation is further accelerating this shift. Smart battery management systems are now featured in approximately 40% of high-end tools, optimizing power consumption and extending runtime. Moreover, electric cutters generate up to 30% less noise, making them suitable for urban and residential projects with strict noise control regulations.

As global markets continue to align with clean energy goals, the demand for electric and battery-operated power cutters is expected to rise significantly. Manufacturers are investing in R&D to offer higher-capacity, multi-material cutters that match or exceed the performance of traditional gas tools, while offering superior user convenience and compliance with sustainability norms.

Industrial Mechanization and Smart Manufacturing

The rise of industrial automation and mechanized production processes is significantly boosting the demand for advanced power cutters. Industries such as automotive, shipbuilding, aerospace, electronics, and construction rely heavily on efficient, durable, and precise cutting tools. As factories modernize, the integration of smart cutting equipment into automated workflows becomes essential.

Today, approximately 40% of manufacturing facilities globally utilize some form of power-assisted or automated cutting process. With the global push toward Industry 4.0, more than 60% of industrial users are transitioning from manual tools to semi- or fully-automated equipment. This has led to an increased demand for high-speed, digitally integrated power cutters with programmable settings and diagnostics.

Hydraulic and pneumatic power cutters, known for their cutting strength and durability, are widely used in heavy industries. These tools are increasingly being upgraded with electronic sensors for load balancing and pressure regulation. In high-precision industries, digital controls now allow operators to adjust torque and blade speed on the fly, improving accuracy by 15–25%.

Additionally, real-time performance monitoring is emerging as a critical feature. About 30% of newly released industrial-grade cutters offer Bluetooth or wireless connectivity to transmit usage data and enable predictive maintenance. These systems reduce unplanned downtime by up to 20% and help in planning tool replacement schedules efficiently.

Moreover, increased safety demands in industrial settings—driven by rising compliance costs and stricter labor laws—push manufacturers to develop cutters with automatic shutdown features and real-time diagnostics. These technologies are not only improving operational efficiency but also reducing liability risks.

In essence, as industries become more mechanized and data-driven, the role of smart, connected, and heavy-duty power cutters becomes central to industrial productivity and safety.

Emphasis on User Safety and Ergonomics

The growing awareness of workplace injuries and health hazards has led to a significant shift toward safer and more ergonomic power cutter designs. Operators often face risks from vibration (HAVS), flying debris, kickback, excessive noise, and prolonged exposure to dust—especially silica. As a result, manufacturers are prioritizing tools that reduce these risks through advanced features and design innovation.

Over 35% of jobsite injuries involving power tools are linked to poor ergonomics or tool malfunction. In response, newer models incorporate anti-vibration systems that reduce hand-arm vibration by up to 50%, allowing longer operation periods without exceeding health thresholds. Additionally, low-noise motors and insulated housings are now standard in many professional-grade cutters, helping users stay within the safe exposure limits of 80–85 dB.

Around 40% of construction companies now mandate the use of tools with integrated dust-suppression systems or water-fed cutting heads to control silica exposure. These systems help lower airborne particulate matter by up to 90%, aligning with safety regulations in North America, Europe, and parts of Asia.

Furthermore, weight reduction is a core focus. Cutter housings made from magnesium or composite alloys can weigh 20–30% less, reducing operator fatigue and improving maneuverability. Soft-grip handles, optimized balance, and improved blade guards are increasingly incorporated to ensure ease of use and better control during operation.

Emergency features like electric brake systems, thermal overload cutoffs, and safety interlocks are also growing in adoption. Around 25% of mid-range models now include auto-stop mechanisms if blade kickback or overheating is detected.

Sustainability and Environmental Regulations

Environmental consciousness and tightening emission norms are major drivers of innovation in the power cutter market. With growing scrutiny over fuel-powered tools that emit noise and carbon monoxide, there’s a strong global trend toward electric and battery-operated models that are cleaner, quieter, and more sustainable.

In recent years, over 30% of urban construction projects have shifted to battery-powered tools for indoor and confined-space applications, where ventilation is limited and emissions must be minimized. These tools produce zero direct emissions, making them ideal for green building projects and LEED-certified sites.

The global movement to ban or restrict gas-powered outdoor equipment in cities like Los Angeles, London, and Paris has prompted manufacturers to accelerate the development of low-emission or emission-free cutters. For example, new regulations enacted in California require the phase-out of small gas engines by a specified date, directly impacting demand for sustainable alternatives.

In terms of energy efficiency, modern battery-powered cutters now feature smart charging systems and energy optimization software, improving runtime by 15–25% and battery lifespan by 30%. This reduces waste and extends tool usability, aligning with circular economy goals.

Material innovation also plays a role. Approximately 20% of new power cutters launched in the last two years use recyclable materials or low-carbon manufacturing techniques, helping companies meet ESG (Environmental, Social, Governance) benchmarks and carbon reporting standards.

Consumer preferences are also shifting: more than 50% of buyers under 40 state that environmental impact influences their purchase decision for tools. This generational shift in attitudes is reshaping long-term demand patterns and encouraging brands to highlight eco-certifications and green credentials.

Download Free Sample Report

Key Market Challenges

High Upfront & Ownership Costs

Power cutters, especially professional-grade models, carry significant upfront and ongoing costs. The initial purchase price can be a barrier for small contractors or new businesses—premium cordless or hydraulic units may cost double that of entry-level gas or corded electric cutters. Beyond purchase price, users incur recurring costs: replacement blades/discs, fuel or battery packs, and maintenance services. Battery-powered cutters often require multiple battery packs (usually 2–3) for uninterrupted operation, roughly doubling ownership cost. Imported units face additional import duties and logistics charges, inflating costs by 10–20% in emerging markets. High-end safety and environmentally compliant models with dust-suppression or low-emission engines further raise prices by 15–25% compared to basic models, impacting adoption in cost-sensitive segments. Financial barriers also extend to training: advanced cutters require operator training and certification, adding labor hours and expenses. Since financing options are limited in many developing countries, adoption among smaller enterprises remains constrained, especially when low-cost manual cutting or alternative tools appear “good enough.” Manufacturers looking to penetrate these segments must explore leasing, rental programs, or modular systems with tiered pricing to reduce financial hurdles.

Regulatory Complexity and Compliance

The power cutter market must contend with a patchwork of global safety, emissions, and workplace regulations. Noise limits (often 80–85 dB) and dust control mandates (e.g. silica exposure limits) vary by region, requiring manufacturers to customize tool design—anti-vibration handles, mufflers, integrated water ports—on a per-market basis. Certification certification processes (e.g., CE, EPA, OSHA, ISI) are lengthy and costly—taking 6–12 months and adding 10–15% to product compliance budgets. Emission standards for small engines are tightening annually, following schedules like Euro Stage V or EPA Tier 4, forcing shifts from 2‑stroke engines to cleaner 4‑stroke or battery units. Non-compliance risks regulatory challenges, sales bans, or product recalls, especially in the EU or North America. For brands exporting globally, adapting product models to multiple standards strains R&D and logistical supply chains. Furthermore, workplace safety rules require user training and personal protective equipment; manufacturers may need to bundle PPE or offer instructional materials. Inconsistent enforcement across markets complicates launch timing and pricing strategies. To succeed, companies must invest in regulatory expertise, modular compliance platforms, and regional partnerships to navigate this labyrinth effectively.

Technical Limitations & Material Constraints

Designing versatile power cutters that meet diverse cutting needs entails technical trade-offs. Gas-powered engines deliver high torque needed for cutting thick materials but are bulky (heavy by ~20–30%) and emit noise and fumes. Corded electric units are lighter, but tethered to power outlets, limiting jobsite mobility. Battery models face constraints in runtime: a high-discharge battery can run for 30–40 minutes under heavy load—shorter than gas—which leads users to keep spare packs or retain gas units, undermining switch incentives. Battery mass increases cutter weight, limiting extended use. Cord insulation and hydraulic line durability are critical; failure rates of hoses or cables (up to 5% annually on high-utilization sites) pose downtime costs. Heat buildup during continuous heavy operation demands cooling systems; poorly managed thermal conditions lead to blade warping and motor throttling. Manufacturers juggling torque, runtime, weight, portability, and cost often settle for compromise designs that may not fully satisfy specialist needs. Overcoming these limitations requires breakthroughs in battery energy density, thermal management, and materials engineering—a costly and lengthy process.

Intense Competitive Pressure & Product Saturation

The power cutter market is highly fragmented, with global heavyweights (Husqvarna, Stihl, Hilti, Bosch, DeWalt, Makita) competing alongside specialized regional brands. Differentiators—battery platform compatibility, blade/drum systems, premium hydraulic cutters—are quickly copied across brands. As a result, product cycles shorten (new models every 12–18 months) and price pressure intensifies. Entry-level models have become commoditized commodities, eroding margins. Brand loyalty is falling; contractors often select tools based on short-term price or platform deals rather than long-term strategy. In markets like North America and Europe, online retail and rental services offer deep discounts, squeezing profits and intensifying marketing complexity. Manufacturers must invest in ongoing R&D, platform ecosystems, loyalty programs, and rental partnerships to hold ground. New entrants from China offering low-cost cordless units further intensify pricing challenges in emerging markets. Standing out requires striking the balance between innovation, quality, and cost—no easy feat given the speed of disruption.

Safety Hazards & Liability Concerns

Operators of power cutters face serious safety risks: blade kickback, silica dust, vibration-related injuries (HAVS), ear damage from noise, and engine backfire. Incidents are common—up to 30% of jobsite accidents involve cutting with power tools. Manufacturers face liability exposure, especially if blades fail or safety guards underperform. Designing failsafe mechanisms—blade shields, mechanical clutches, quick-stop sensors—adds cost and complexity. Communicating safe operation requires multilingual manuals, training content, and in-app or QR-code-based user guides. In many emerging markets, PPE adoption is inconsistent; manufacturers must incorporate safety kits (gloves, goggles, dust masks) into higher-margin bundles, which raises price and logistical burden. Insurance costs for rental fleet owners using gas-powered cutters are also rising year-on-year by ~5%, pressuring operators to purchase low-risk electric models. Failure to address safety issues can result in lawsuits, fines, banned products, or reputational harm—firmly placing safety as a top challenge.

Key Market Trends

Ergonomic & Safety-Centric Designs

User comfort and safety have become defining attributes. Manufacturers invest in anti-vibration mounts, lighter magnesium/alloy housings, optimized center-of-gravity layouts, and redesigned handles to reduce fatigue. New models weigh 15–25% less than predecessors while maintaining equivalent power. Noise-muffling technology and integrated water/dust ports help comply with 80 dB thresholds and silica dust limits. Blade guards now tilt and retract based on cut angle, offering enhanced user protection. Safety interlocks and sensor-triggered auto-stop systems appear in mid-tier models. These ergonomic and safety upgrades not only align with regulation but also increase jobsite productivity via reduced downtime and injury rates.

Rental & On-Demand Access Models

To alleviate ownership costs, rental and tool-sharing services are expanding. Rental platforms offer daily, weekly, or long-term power cutter hire, complete with blade kits and accessories. B2B rental penetration in construction is increasing by approximately 5–7% annually, especially in urban markets. On-demand delivery—sometimes within a few hours—makes rental cutters viable for small firms that cannot justify battery fleets upfront. Fleet operators are increasingly opting for electric or cordless units due to lower insurance and maintenance costs—rental fleets of battery-powered cutters have grown by an estimated 20% year-over-year. OEMs are launching rental division partnerships or subscription models (e.g., monthly bundles) to counter price erosion and prolong customer relationship beyond a single sale.

Material Innovation & Additive Manufacturing

Advances in material science are driving new cutter designs. Composites (carbon-fiber-reinforced polymers) now form up to 30% of cutter housings, replacing steel and reducing weight without compromising durability. Ceramic-coated blades improve abrasion resistance and have twice the lifespan of standard steel. Magnetic quick-change blade/chuck systems enable blade swaps in 10 seconds, improving jobsite efficiency. Additive manufacturing (3D printing) is used to prototype complex guard and handle geometries with organic shapes—quickening design cycles by around 50%. Customizable ergonomics (prints tailored to hand size or glove dimensions) are being tested, enabling “clinic fit” ergonomic accuracy. These material and production innovations enable distributors to introduce modular, repairable, or upgradable tools, extending product life and sustainability.

Segmental Insights

Power Type Insights

Gas-powered segment dominates in the Global Power Cutter market in 2024 due to their unmatched cutting power, operational independence, and suitability for heavy-duty applications. These cutters are particularly preferred in industries such as construction, mining, infrastructure, and emergency services where consistent high torque is essential to cut through dense materials like reinforced concrete, steel, and asphalt.

Gas-powered cutters offer the benefit of portability without reliance on batteries or access to electrical power, making them ideal for remote or undeveloped construction sites. In high-load conditions, they maintain performance over long hours—battery and corded variants struggle to match this efficiency, especially in demanding outdoor environments. The average runtime of a gas cutter without refueling is significantly longer than battery-operated tools, with operators citing 25–40% more continuous use before downtime is needed.

Contractors and professionals also favor gas cutters for their versatility; they support a wide range of blade sizes and depths and can be used in varying weather conditions. Around 60–65% of commercial contractors in developing regions still choose gas models due to the lower upfront cost and widespread fuel availability compared to electric infrastructure and battery charging support, which may be lacking in rural areas.

In addition, gas-powered models have evolved to meet regulatory requirements, with many now featuring low-emission engines, integrated vibration reduction, and advanced cooling systems to reduce operator fatigue. Despite the shift toward eco-friendly solutions, the durability, familiarity, and raw performance of gas cutters keep them firmly in the lead in 2024, particularly for high-volume and outdoor applications where performance takes precedence over emission concerns. As a result, they remain the first choice for professionals needing rugged, reliable power cutters in the most challenging conditions.

Cutter Type Insights

Ring cutters segment dominated the Global Power Cutter market in 2024 due to their ability to deliver deeper, more precise cuts compared to traditional disc cutters. Their design allows for full-depth cutting from one side, making them ideal for thick concrete walls, pipes, and stone structures. This capability reduces the need for double-sided access, improving efficiency and safety on job sites. Additionally, ring cutters offer improved blade stability, minimizing kickback and increasing control. Their growing adoption in rescue operations, infrastructure repair, and tight-space industrial tasks has made them the preferred choice in both developed and developing construction environments.

Download Free Sample Report

Regional Insights

Largest Region

North America dominates the Global Power Cutter market in 2024 driven by a combination of advanced infrastructure, stringent safety standards, and high demand across professional sectors. The region benefits from mature construction and industrial markets that rely heavily on power cutters for concrete, asphalt, and metal cutting applications. Ongoing investments in smart cities, commercial buildings, transportation, and energy infrastructure create consistent demand for precision cutting tools.

North American users prioritize performance, safety, and compliance, leading to a strong preference for professional-grade tools with advanced features such as anti-vibration systems, digital motor controls, dust suppression, and OSHA-compliant designs. Over 70% of commercial contractors in the U.S. and Canada use premium power cutters with upgraded ergonomic and safety functions. Furthermore, rental penetration is high—more than 40% of power cutters used on jobsites are obtained through tool rental companies—driving regular fleet refreshment and adoption of the latest technologies.

Battery-powered and cordless models are gaining popularity due to urban emission regulations and labor safety concerns. However, gas-powered tools still dominate for heavy-duty outdoor work, thanks to widespread fuel infrastructure and user familiarity. The region’s diverse climate and geography—from freezing winters to desert heat—favor durable, high-performance tools that can withstand extreme conditions.

Additionally, North America is home to several leading manufacturers and distributors, allowing for rapid innovation, local customization, and efficient distribution channels. These include industry giants that invest heavily in R&D, marketing, and dealer networks. High consumer purchasing power and the growing trend of DIY home renovation further support the power cutter market in residential and commercial sectors.

Emerging Region

Europe is the emerging region in the Global Power Cutter market in the coming period due to its accelerating infrastructure upgrades, strong environmental policies, and high adoption of battery-powered tools. Countries like Germany, France, and the UK are investing in sustainable construction, retrofitting old buildings, and expanding green transportation networks—all of which require advanced cutting equipment. Strict emission and noise regulations are pushing demand for cordless, low-emission models, especially in urban areas. Additionally, Europe’s emphasis on workplace safety and ergonomic tools is encouraging the shift toward high-end, feature-rich cutters, positioning the region as a fast-growing and innovation-driven power cutter market.

Recent Developments

• In February 2025, Tata Power, one of India’s largest integrated power utilities, has partnered with Amazon Web Services (AWS) to accelerate its digital transformation. This initiative aims to enhance operational efficiency, grid resilience, and customer engagement. Leveraging AWS, Tata Power is fostering a smarter and greener energy ecosystem by enabling consumers across various states to actively participate in India’s clean energy transition, reinforcing the company’s commitment to a low-carbon and sustainable future.
• In February 2025, ACWA Power, a global leader in desalination, energy transition, and green hydrogen, signed seven strategic partnership agreements during its Innovation Days 2025 in Riyadh. Collaborating with major entities including Saudi Aramco, Bluewater Bio, Dow, Hysata, and KAUST, these agreements mark the event's highest engagement to date. The partnerships aim to drive innovation across water and energy sectors, strengthen R&D initiatives, and reinforce ACWA Power’s leadership in sustainable solutions and clean energy technologies globally.
• In May 2025, Power Factors has entered an exclusive partnership with BNZ to deliver integrated SCADA and Power Plant Controller (PPC) solutions across BNZ’s renewable energy portfolio. The collaboration enables real-time monitoring, performance optimization, and seamless management of diverse energy assets. This agreement supports BNZ’s strategic focus on efficiency and scalability in project operations, enhancing their renewable energy deployment capabilities across current and future developments, and advancing digital control integration in utility-scale clean energy infrastructure.
• In December 2024, Intersect Power, in partnership with Google and TPG Rise Climate, is launching a power-first strategy to develop gigawatt-scale renewable infrastructure for new U.S. data centers. Targeting USD20 billion in clean energy investment, the initiative co-locates power generation, storage, and data center capacity to accelerate deployment, reduce grid congestion, and enhance reliability. The first integrated site is under financing, with operations set to begin in 2026, positioning Intersect as a key driver in sustainable digital infrastructure growth.

Key Market Players

• Husqvarna             
• Makita Corporation
• Robert Bosch
• Stanley Black & Decker
• Andreas Stihl AG & Co.
• Techtronic Industries
• Hilti Corporation
• Stanley Black & Decker brand
• Metabo Corporation
• Festool GmbH            

Report Scope:

In this report, the Global Power Cutter Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

•  Power Cutter Market, By Power Type:

o   Gas-powered

o   Battery-powered

o   Electric-powered

o   Pneumatic-powered

o   Hydraulic-powered

• Power Cutter Market, By Cutter Type:

o   Ring cutters

o   Chain cutters

• Power Cutter Market, By Application:

o   Residential

o   Commercial

o   Industrial

• Power Cutter Market, By Region:

o   North America

§  United States

§  Canada

§  Mexico

o   Europe

§  Germany

§  France

§  United Kingdom

§  Italy

§  Spain

o   South America

§  Brazil

§  Argentina

§  Colombia

o   Asia-Pacific

§  China

§  India

§  Japan

§  South Korea

§  Australia

o   Middle East & Africa

§  Saudi Arabia

§  UAE

§  South Africa

Competitive Landscape

Company Profiles: Detailed analysis of the major companies present in the Global Power Cutter Market.

Available Customizations:

Global Power Cutter Market report with the given market data, Tech Sci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

• Detailed analysis and profiling of additional market players (up to five).

Global Power Cutter Market is an upcoming report to be released soon. If you wish an early delivery of this report or want to confirm the date of release, please contact us at [email protected]