Report Description

Forecast Period

2025-2029

Market Size (2023)

USD 1.2 Billion

CAGR (2024-2029)

7.54%

Fastest Growing Segment

General Aviation

Largest Market

North America

Market Size (2029)

USD 1.85 Billion






Market Overview

Global Aeroengine Accessory Drive Train Market was valued at USD 1.2 billion in 2023 and is anticipated to project robust growth in the forecast period with a CAGR of 7.54% through 2029. The global aeroengine accessory drive train market is a crucial component within the broader aerospace industry, facilitating the efficient operation of aircraft engines. This market segment encompasses various components such as gears, shafts, bearings, and housings that transfer power from the engine to auxiliary systems like hydraulic pumps, generators, and fuel pumps.

The demand for aeroengine accessory drive train systems has been primarily driven by the growing aviation sector, particularly the expansion of commercial air travel. As airlines continue to modernize their fleets and replace older aircraft with more fuel-efficient models, the need for reliable and high-performance accessory drive train systems has increased.

Advancements in engine technology have also contributed to the evolution of the accessory drive train market. Manufacturers are constantly striving to develop lighter, more durable, and energy-efficient components to improve overall aircraft performance and fuel efficiency. This trend is expected to continue driving innovation and investment in the market.

The rise of the defense sector and the increasing adoption of unmanned aerial vehicles (UAVs) have opened up new opportunities for the aeroengine accessory drive train market. Military aircraft and UAVs require robust and reliable accessory drive train systems to support a wide range of mission-critical functions, including surveillance, reconnaissance, and weapons delivery.

The aerospace industry's emphasis on sustainability and environmental responsibility is likely to influence the aeroengine accessory drive train market in the coming years. Manufacturers are under pressure to develop eco-friendly solutions that reduce carbon emissions and minimize environmental impact without compromising performance or safety.

Market Drivers

Demand for Fuel-Efficient Solutions

One of the primary drivers propelling the global Aeroengine Accessory Drive Train market is the aerospace industry's increasing emphasis on fuel efficiency. As airlines and aircraft manufacturers strive to minimize operational costs and reduce their environmental impact, the Aeroengine ADT plays a crucial role in achieving these objectives. The ADT is integral to optimizing the performance of various accessories in aircraft engines, including generators, fuel pumps, and hydraulic pumps, contributing directly to fuel efficiency. The demand for fuel-efficient solutions is driven by the industry's commitment to sustainability and the continuous pursuit of innovative technologies. Airlines seek Aeroengine ADTs that not only enhance the performance of accessory components but also contribute to overall aircraft fuel savings. As regulatory bodies worldwide intensify their focus on emissions reduction and fuel efficiency standards, the Aeroengine ADT market is poised to witness sustained growth in response to the industry's collective commitment to environmental responsibility.

Fuel efficiency is a critical factor influencing overall aircraft efficiency, and the Aeroengine ADT plays a pivotal role in achieving optimal fuel consumption. The design and functionality of the ADT directly impact the power transmission to various engine accessories, influencing the overall efficiency of the aircraft propulsion system. Manufacturers in the Aeroengine ADT market are under increasing pressure to develop advanced solutions that minimize power losses, reduce friction, and enhance the overall efficiency of accessory drive systems. Airlines operating large fleets and seeking to minimize operational costs place a premium on Aeroengine ADTs that contribute significantly to fuel savings. This driver is closely tied to the industry's broader goals of achieving sustainable aviation practices, aligning with regulatory standards, and reducing the carbon footprint of air travel.

Advancements in Aerospace Technology

The global Aeroengine ADT market is significantly influenced by ongoing advancements in aerospace technology. As aircraft engines evolve to meet higher performance standards and stricter environmental regulations, the Aeroengine ADT must adapt to accommodate these technological changes. Advancements in materials, design methodologies, and manufacturing processes are critical drivers shaping the Aeroengine ADT landscape. The adoption of advanced materials, such as lightweight alloys and composite materials, influences the design and construction of Aeroengine ADTs. These materials contribute to weight reduction, essential for enhancing fuel efficiency and overall aircraft performance. Additionally, advancements in precision engineering and manufacturing technologies enable the production of Aeroengine ADTs with tighter tolerances and improved reliability, meeting the demands of modern aerospace applications.

A notable trend driving the Aeroengine ADT market is the integration of digital technologies to enhance monitoring, control, and predictive maintenance capabilities. The introduction of smart sensors, data analytics, and condition monitoring systems within Aeroengine ADTs enables real-time performance assessment and facilitates proactive maintenance strategies. Digital technologies provide valuable insights into the health and operational status of Aeroengine ADTs, allowing for timely interventions to prevent potential failures. This integration aligns with the broader industry trend toward digitalization and connectivity, contributing to the development of more intelligent and efficient aerospace systems.

Growth in Commercial Aviation

The robust growth of the global commercial aviation sector acts as a significant driver for the Aeroengine ADT market. The increasing demand for air travel, particularly in emerging markets, drives airlines to expand their fleets and modernize existing aircraft. As a result, the Aeroengine ADT market experiences a surge in demand for technologically advanced and fuel-efficient drive train solutions that align with the evolving needs of commercial aviation. The expansion of commercial fleets presents opportunities for Aeroengine ADT manufacturers to provide innovative solutions that cater to different aircraft types and sizes. With the rising middle-class population in emerging economies contributing to increased air travel, the Aeroengine ADT market is poised for sustained growth as airlines invest in the latest propulsion technologies.

The demand for Aeroengine ADTs is particularly pronounced in both narrow- and wide-body aircraft segments. Narrow-body aircraft, used for short- to medium-haul routes, require Aeroengine ADTs that prioritize weight reduction and fuel efficiency. On the other hand, wide-body aircraft, often employed for long-haul flights, demand more robust and high-performance ADTs to meet the demands of extended operational durations. Manufacturers catering to the commercial aviation sector must develop Aeroengine ADTs that strike the right balance between weight, performance, and durability. This driver emphasizes the need for versatile solutions that can be tailored to the specific requirements of diverse aircraft configurations.

Increasing Need for Enhanced Durability

Durability is a critical consideration driving the demand for advanced Aeroengine ADTs, especially given the harsh operational conditions encountered by aircraft engines. As engines operate in diverse environments, including high temperatures, extreme altitudes, and challenging weather conditions, the Aeroengine ADT must withstand mechanical stresses and ensure the reliable transmission of power to accessories. Enhanced durability is crucial for minimizing maintenance requirements, reducing downtime, and extending the overall lifespan of Aeroengine ADTs. Manufacturers focus on developing robust solutions that can endure the rigors of continuous operation, contributing to the long-term reliability and cost-effectiveness of aircraft engines.

The aviation industry's trend toward extended maintenance intervals further accentuates the importance of durability in Aeroengine ADTs. Aircraft operators seek solutions that not only meet stringent performance requirements but also support extended periods between maintenance cycles. This driver aligns with the industry's overarching goal of optimizing aircraft availability, reducing operational disruptions, and enhancing overall cost-effectiveness. The Aeroengine ADT market responds to this need by developing components and systems that exhibit enhanced resistance to wear and fatigue, supporting the industry's shift towards more efficient and proactive maintenance practices.

Focus on Environmental Sustainability

Environmental sustainability is emerging as a significant driver in the global Aeroengine ADT market, spurred by regulatory mandates and the aviation industry's commitment to reducing carbon emissions. Regulatory bodies worldwide are imposing increasingly stringent emissions standards and fuel efficiency requirements, compelling manufacturers to develop Aeroengine ADTs that align with these sustainability objectives. The development of fuel-efficient Aeroengine ADTs contributes directly to the industry's efforts to reduce the overall carbon footprint of air travel. Manufacturers investing in research and development to create environmentally friendly solutions position themselves to meet regulatory requirements and cater to airlines' preferences for sustainable propulsion systems.


Download Free Sample Report

Key Market Challenges

Stringent Regulatory Compliance

One of the primary challenges faced by the global Aeroengine ADT market is the ever-evolving and stringent regulatory landscape. Aviation authorities worldwide continually introduce and update regulations to enhance safety, reduce emissions, and improve overall environmental performance. Compliance with these regulations is not only mandatory but also necessitates constant adaptation and innovation from Aeroengine ADT manufacturers. Regulatory mandates cover a broad spectrum of requirements, including emissions standards, noise reduction, and safety certifications. As environmental concerns take center stage, manufacturers must invest in research and development to ensure that Aeroengine ADTs not only meet current regulations but are also prepared for future, more stringent standards. This challenge is further complicated by the fact that different regions may have distinct regulatory frameworks, requiring manufacturers to navigate a complex web of compliance requirements.

The aerospace industry is under increasing pressure to contribute to global efforts in reducing carbon emissions. Aeroengine ADT manufacturers face the challenge of developing systems that not only comply with existing emission reduction targets but also align with the industry's long-term goals for sustainable aviation. This necessitates a holistic approach, integrating lightweight materials, advanced technologies, and fuel-efficient designs into Aeroengine ADTs. Meeting emission reduction targets requires substantial investments in research and development, posing financial challenges for manufacturers. Striking a balance between compliance and cost-effectiveness is crucial, as Aeroengine ADTs must not only meet environmental standards but also remain economically viable for both manufacturers and end-users.

Economic Uncertainties and Market Volatility

The global Aeroengine ADT market is susceptible to economic uncertainties and market volatility, which can significantly impact both demand and supply dynamics. Economic downturns, such as recessions or financial crises, often lead to reduced air travel demand, affecting new aircraft orders and the aftermarket for Aeroengine ADTs. Airlines, facing financial constraints during challenging economic periods, may defer or cancel fleet expansion plans, directly impacting the Aeroengine ADT market. Market volatility can also influence raw material prices, production costs, and overall profitability for manufacturers. Uncertainties related to economic conditions make it challenging for Aeroengine ADT manufacturers to predict market trends accurately and plan for long-term investments. Navigating these uncertainties requires strategic planning, financial resilience, and the ability to adapt quickly to changing market dynamics.

The global Aeroengine ADT market is interconnected with complex and often globalized supply chains. Supply chain disruptions, whether caused by geopolitical events, natural disasters, or unforeseen circumstances like the COVID-19 pandemic, present a significant challenge for manufacturers. Interruptions in the supply chain can lead to delays in production, increased costs, and difficulties in meeting customer demand. Manufacturers must develop robust contingency plans to address potential disruptions, including alternative sourcing strategies, inventory management, and close collaboration with suppliers. The challenge lies in balancing efficiency with resilience, as overly complex or extended supply chains may increase vulnerability to disruptions, while overly localized supply chains may limit cost competitiveness.

Technological Complexity and Rapid Advancements

The Aeroengine ADT market is characterized by increasing technological complexity as engines evolve to meet higher performance and efficiency standards. The integration of advanced materials, precision engineering, and digital technologies presents a challenge for manufacturers in terms of research, development, and production capabilities. Developing Aeroengine ADTs that incorporate lightweight materials, withstand extreme operating conditions, and meet the demands of modern aviation requires a deep understanding of diverse engineering disciplines. The challenge is not only to stay abreast of current technological advancements but also to anticipate future trends and requirements, ensuring that Aeroengine ADTs remain at the forefront of innovation.

Rapid technological advancements necessitate a delicate balance between innovation and the certification processes required for new Aeroengine ADT designs. Certification by aviation authorities is a lengthy and rigorous process, ensuring that new technologies meet stringent safety and reliability standards. Manufacturers must carefully manage the integration of innovative features while navigating the complexities of certification procedures. The challenge is particularly acute for Aeroengine ADTs that incorporate cutting-edge technologies such as digital sensors, real-time monitoring systems, and adaptive controls. Striking the right balance between innovation and certification timelines requires close collaboration with regulatory bodies and a proactive approach to addressing safety and reliability concerns.

Intensive Competition and Market Consolidation

Intensive competition within the global Aeroengine ADT market poses a significant challenge for manufacturers. The market is characterized by several key players, each vying for market share through innovation, cost competitiveness, and the ability to meet diverse customer requirements. Intense competition can lead to pricing pressures, squeezing profit margins and necessitating efficient production processes. Market consolidation, where larger companies acquire smaller competitors or merge with other entities, is another factor influencing the competitive landscape. While consolidation can lead to synergies and increased market share for the surviving entities, it can also limit options for smaller manufacturers and potentially reduce overall competitiveness.

Manufacturers face the challenge of developing differentiated product offerings to stand out in a crowded market. With customers seeking Aeroengine ADTs that offer a combination of performance, reliability, and cost-effectiveness, manufacturers must invest in research and development to create unique features or functionalities that address specific market demands. The challenge extends beyond product development to effective marketing and communication strategies. Manufacturers must clearly articulate the value proposition of their Aeroengine ADTs, emphasizing how their offerings outperform competitors in terms of efficiency, durability, and overall cost of ownership.

Key Market Trends

Integration of Advanced Materials

A significant trend shaping the global Aeroengine ADT market is the widespread integration of advanced materials, with a particular focus on lightweight alloys and composites. The aerospace industry's pursuit of enhanced fuel efficiency and overall performance has driven manufacturers to explore materials that offer a favorable strength-to-weight ratio. Lightweight alloys, such as titanium and advanced aluminum alloys, are increasingly used in the construction of Aeroengine ADTs. These materials contribute to weight reduction, a critical factor in optimizing fuel consumption and reducing the environmental impact of air travel. Composites, including carbon-fiber-reinforced polymers, are also gaining prominence for their high strength and corrosion resistance, further enhancing the durability and efficiency of Aeroengine ADTs.

The adoption of Ceramic Matrix Composites (CMCs) is emerging as a trend that holds immense potential for revolutionizing Aeroengine ADT design. CMCs exhibit exceptional resistance to high temperatures, making them well-suited for components exposed to extreme heat in aircraft engines. As manufacturers seek to improve the thermal performance and efficiency of Aeroengine ADTs, CMCs are being integrated into components like gearboxes and shafts. The use of CMCs not only contributes to weight reduction but also enhances the overall durability of Aeroengine ADTs, particularly in high-stress areas. This trend aligns with the industry's quest for materials capable of withstanding the demanding operating conditions of modern aircraft engines.

Digitalization and Smart Technologies

The integration of digitalization and smart technologies is a transformative trend in the Aeroengine ADT market, ushering in an era of enhanced monitoring, diagnostics, and predictive maintenance. Digital twins, virtual replicas of physical components or systems, are being employed to create real-time simulations of Aeroengine ADTs. This allows for continuous monitoring of performance, identifying potential issues before they escalate into critical failures. Digital twins enable manufacturers and operators to gain valuable insights into the health and operational status of Aeroengine ADTs, facilitating data-driven decision-making. The implementation of smart sensors and connectivity further enhances the ability to collect, analyze, and act upon real-time data, contributing to improved reliability and efficiency.

Condition monitoring systems are becoming integral components of Aeroengine ADTs, providing continuous surveillance of critical parameters. These systems utilize sensors to monitor factors such as temperature, vibration, and wear in real-time. The data collected is then analyzed to assess the condition of various components, allowing for proactive maintenance strategies. The adoption of condition monitoring systems enhances the overall operational efficiency of Aeroengine ADTs by enabling timely interventions. This trend reflects the industry's commitment to preventive maintenance practices, reducing unplanned downtime and extending the lifespan of Aeroengine ADTs.

Sustainability and Eco-Friendly Practices

Sustainability is a pervasive trend in the aerospace industry, and it is increasingly influencing the Aeroengine ADT market. Manufacturers are placing a greater emphasis on the use of environmentally friendly materials and manufacturing processes. This includes the adoption of green materials, such as recyclable alloys and composites, in the production of Aeroengine ADTs. Green manufacturing practices, which prioritize energy efficiency and waste reduction, are gaining traction. Manufacturers are exploring ways to minimize the environmental impact of Aeroengine ADT production, aligning with broader industry goals of achieving sustainable aviation practices.

A noteworthy trend contributing to the sustainability of Aeroengine ADTs is the compatibility with alternative aviation fuels, particularly biofuels. The aviation industry is exploring biofuels as a means to reduce its reliance on traditional fossil fuels and lower overall carbon emissions. Aeroengine ADTs are being designed to operate seamlessly with biofuels, providing a greener alternative to traditional aviation fuels. This trend aligns with the industry's commitment to mitigating the environmental impact of air travel. Manufacturers are investing in research and development to ensure that Aeroengine ADTs not only meet the technical requirements for biofuel compatibility but also contribute to the broader goal of sustainable aviation.

Advanced Manufacturing Techniques

Advanced manufacturing techniques, notably additive manufacturing or 3D printing, are revolutionizing the production of Aeroengine ADTs. This trend allows for the creation of intricate and lightweight components that would be challenging or impossible to manufacture using traditional methods. Additive manufacturing enables the production of complex geometries with improved efficiency and reduced waste. The use of 3D printing in Aeroengine ADT manufacturing extends to components such as brackets, brackets, and housings, offering opportunities for weight reduction and increased design flexibility. As additive manufacturing technologies continue to evolve, their integration into the production processes of Aeroengine ADTs is anticipated to grow, bringing about cost efficiencies and design innovations.

The adoption of robotics and automation in Aeroengine ADT manufacturing is another trend streamlining production processes. Automated systems are employed for tasks such as precision machining, assembly, and quality control, contributing to increased efficiency and consistency in manufacturing. Robotic systems are particularly beneficial for tasks that require high precision and repeatability. The integration of automation not only accelerates production but also enhances the overall quality and reliability of Aeroengine ADTs. This trend reflects the industry's commitment to leveraging cutting-edge technologies to optimize manufacturing processes and improve the performance of aerospace components.

Increased Emphasis on Predictive Maintenance

Predictive maintenance, facilitated by Prognostics and Health Management (PHM) technologies, is emerging as a crucial trend in the Aeroengine ADT market. PHM involves the continuous monitoring of Aeroengine ADT components to assess their health and predict potential failures before they occur. This proactive approach to maintenance helps minimize unplanned downtime and reduce overall maintenance costs. The implementation of PHM technologies involves sophisticated algorithms and machine learning, enabling the analysis of vast amounts of data generated by sensors in real-time. By accurately predicting component degradation and potential failures, Aeroengine ADT operators can plan maintenance activities more efficiently, optimize component replacement schedules, and enhance overall system reliability.

Segmental Insights

Engine Type Analysis

The global aeroengine accessory drive train market is intricately tied to various engine types utilized across the aviation sector, each with its unique requirements and applications. Turbofan engines, renowned for their efficiency and power, have emerged as one of the dominant engine types in both commercial and military aircraft. The accessory drive train systems associated with turbofan engines play a vital role in powering auxiliary systems such as hydraulic pumps, generators, and fuel pumps, ensuring optimal performance and reliability during flight operations. With the continual advancements in turbofan engine technology, the demand for advanced and lightweight accessory drive train solutions is expected to witness steady growth.

Turbojet engines, though less prevalent in modern commercial aviation, remain crucial in certain military and niche aerospace applications. Aeroengine accessory drive train systems tailored for turbojet engines are designed to withstand high temperatures and extreme operating conditions, delivering the necessary power to auxiliary systems while maintaining durability and performance. As defense spending continues to rise in various regions, the demand for robust accessory drive train solutions for turbojet engines is projected to remain steady.

Turboprop engines, characterized by their use in regional and commuter aircraft, rely on accessory drive train systems to power essential components such as propellers, fuel pumps, and hydraulic systems. The unique operating characteristics of turboprop engines, including their ability to operate efficiently at lower speeds and altitudes, necessitate accessory drive train solutions optimized for reliability, efficiency, and weight savings. As regional air travel continues to grow, particularly in emerging markets, the demand for turboprop engine accessory drive train systems is expected to follow suit.

Turboshaft engines, commonly found in helicopters and certain military aircraft, present distinct challenges and requirements for accessory drive train systems. These engines power rotor systems, transmission systems, and other critical components, demanding highly specialized and durable accessory drive train solutions capable of withstanding the unique operating environments encountered in rotorcraft applications. With the expanding use of helicopters in both commercial and military operations, the demand for advanced turboshaft engine accessory drive train systems is anticipated to witness steady growth.

 

Download Free Sample Report

Regional Insights

The global aeroengine accessory drive train market encompasses various regions, each contributing to its overall dynamics. North America, with its robust aerospace industry, serves as a key player in shaping market trends. The region boasts a well-established network of aerospace manufacturers and suppliers, driving demand for accessory drive train components. Moreover, technological advancements and ongoing research and development activities further propel market growth in North America. Additionally, stringent safety regulations and increasing investments in aerospace infrastructure contribute to the region's significance in the global market landscape.

Europe & CIS also play a significant role in the global aeroengine accessory drive train market. Countries like Germany, France, and the United Kingdom are known for their expertise in aerospace engineering and manufacturing. The region's emphasis on innovation and collaboration fosters the development of advanced drive train technologies. Furthermore, partnerships between industry players and research institutions drive the evolution of accessory drive train systems in Europe & CIS. This creates opportunities for market expansion and technological advancements, contributing to the region's competitiveness in the global market.

The Asia Pacific region emerges as a promising market for aeroengine accessory drive trains. Rapid industrialization and economic growth in countries like China, Japan, and India drive demand for commercial and military aircraft. Consequently, there is a growing need for reliable and efficient accessory drive train systems to support these aircraft. Moreover, government initiatives to promote indigenous aerospace manufacturing stimulate market growth in the Asia Pacific region. However, the market in Asia Pacific is also characterized by intense competition and price sensitivity, posing challenges to market players.

South America represents another growing market for aeroengine accessory drive trains. Countries like Brazil and Argentina are investing in their aerospace sectors, creating opportunities for component suppliers. The region's expanding aviation industry, coupled with increasing air travel demand, drives the need for reliable drive train solutions. Additionally, efforts to modernize defense capabilities further boost market growth in South America. However, economic volatility and political uncertainties may impact market dynamics in the region, necessitating strategic planning by industry stakeholders.

The Middle East & Africa region also contributes to the global aeroengine accessory drive train market. Countries like Saudi Arabia and the United Arab Emirates are investing in aerospace infrastructure and technology. This creates opportunities for component suppliers to cater to the region's growing aviation needs. Moreover, the strategic location of the Middle East & Africa region facilitates trade and collaboration in the aerospace sector. However, challenges such as regulatory hurdles and supply chain disruptions may affect market dynamics in the region, requiring adaptability from market players.

Recent Development

  • In May 2024, Next Level Aviation® (NLA) and Aeras Aviation signed a fresh consignment agreement for CFM56 engine accessories. Aeras Aviation entrusted NLA with CFM56-5B and -7B teardown accessories, which NLA then handled, managing repair, quality assurance, warehousing, and logistics. Next Level Aviation® distributed the serviceable CFM56 material worldwide, ensuring effective support for the global customer bases of both entities.

Key Market Players

  • GE Avio Srl (General Electric Company)
  • BMT Aerospace International NV
  • Liebherr-International Deutschland GmbH
  • Northstar Aerospace
  • Safran SA
  • The Timken Company
  • Triumph Group Inc.
  • RTX Corporation
  • AB SKF


By Aircraft Type

By Component

By Engine Type

By Region

  • Commercial
  • Regional
  • Military
  • General Aviation
  • Accessory Gearbox
  • Internal Gearbox
  • Transfer Gearbox
  • Radial & Horizontal Shaft
  • Others
  • Turbofan Engine
  • Turbojet Engine
  • Turboprop Engine
  • Turboshaft Engine
  • North America
  • Europe & CIS
  • Asia Pacific
  • South America
  • Middle East & Africa


Report Scope:

In this report, the Global Aeroengine Accessory Drive Train Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

  • Aeroengine Accessory Drive Train Market, By Aircraft Type:

o   Commercial

o   Regional

o   Military

o   General Aviation

  • Aeroengine Accessory Drive Train Market, By Component:

o   Accessory Gearbox

o   Internal Gearbox

o   Transfer Gearbox

o   Radial & Horizontal Shaft

o   Others

  • Aeroengine Accessory Drive Train Market, By Engine Type:

o   Turbofan Engine

o   Turbojet Engine

o   Turboprop Engine

o   Turboshaft Engine

  • Aeroengine Accessory Drive Train Market, By Region:

o   Asia-Pacific

§  China

§  India

§  Japan

§  Indonesia

§  Thailand

§  South Korea

§  Australia

o   Europe & CIS

§  Germany

§  Spain

§  France

§  Russia

§  Italy

§  United Kingdom

§  Belgium

o   North America

§  United States

§  Canada

§  Mexico

o   South America

§  Brazil

§  Argentina

§  Colombia

o   Middle East & Africa

§  South Africa

§  Turkey

§  Saudi Arabia

§  UAE

Competitive Landscape

Company Profiles: Detailed analysis of the major companies present in the Global Aeroengine Accessory Drive Train Market.

Available Customizations:

Global Aeroengine Accessory Drive Train market report with the given market data, Tech Sci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

  • Detailed analysis and profiling of additional market players (up to five).

Global Aeroengine Accessory Drive Train Market is an upcoming report to be released soon. If you wish an early delivery of this report or want to confirm the date of release, please contact us at [email protected]

Table of content

1.    Introduction

1.1.  Product Overview

1.2.  Key Highlights of the Report

1.3.  Market Coverage

1.4.  Market Segments Covered

1.5.  Research Tenure Considered

2.    Research Methodology

2.1.  Methodology Landscape

2.2.  Objective of the Study

2.3.  Baseline Methodology

2.4.  Formulation of the Scope

2.5.  Assumptions and Limitations

2.6.  Sources of Research

2.7.  Approach for the Market Study

2.8.  Methodology Followed for Calculation of Market Size & Market Shares

2.9.  Forecasting Methodology

3.    Executive Summary

3.1.  Market Overview

3.2.  Market Forecast

3.3.  Key Regions

3.4.  Key Segments

4.    Impact of COVID-19 on Global Aeroengine Accessory Drive Train Market

5.    Global Aeroengine Accessory Drive Train Market Outlook

5.1.  Market Size & Forecast

5.1.1.    By Value

5.2.  Market Share & Forecast

5.2.1.    By Aircraft Type Market Share Analysis (Commercial, Regional, Military, General Aviation)

5.2.2.    By Component Market Share Analysis (Accessory Gearbox, Internal Gearbox, Transfer Gearbox, Radial & Horizontal Shaft, Others)

5.2.3.    By Engine Type Market Share Analysis (Turbofan Engine, Turbojet Engine, Turboprop Engine, Turboshaft Engine)

5.2.4.    By Regional Market Share Analysis

5.2.4.1.        Asia-Pacific Market Share Analysis

5.2.4.2.        Europe & CIS Market Share Analysis

5.2.4.3.        North America Market Share Analysis

5.2.4.4.        South America Market Share Analysis

5.2.4.5.        Middle East & Africa Market Share Analysis

5.2.5.    By Company Market Share Analysis (Top 5 Companies, Others - By Value, 2023)

5.3.  Global Aeroengine Accessory Drive Train Market Mapping & Opportunity Assessment

5.3.1.    By Aircraft Type Market Mapping & Opportunity Assessment

5.3.2.    By Component Market Mapping & Opportunity Assessment

5.3.3.    By Engine Type Market Mapping & Opportunity Assessment

5.3.4.    By Regional Market Mapping & Opportunity Assessment

6.    Asia-Pacific Aeroengine Accessory Drive Train Market Outlook

6.1.  Market Size & Forecast

6.1.1.    By Value  

6.2.  Market Share & Forecast

6.2.1.    By Aircraft Type Market Share Analysis

6.2.2.    By Component Market Share Analysis

6.2.3.    By Engine Type Market Share Analysis

6.2.4.    By Country Market Share Analysis

6.2.4.1.        China Market Share Analysis

6.2.4.2.        India Market Share Analysis

6.2.4.3.        Japan Market Share Analysis

6.2.4.4.        Indonesia Market Share Analysis

6.2.4.5.        Thailand Market Share Analysis

6.2.4.6.        South Korea Market Share Analysis

6.2.4.7.        Australia Market Share Analysis

6.2.4.8.        Rest of Asia-Pacific Market Share Analysis

6.3.  Asia-Pacific: Country Analysis

6.3.1.    China Aeroengine Accessory Drive Train Market Outlook

6.3.1.1.        Market Size & Forecast

6.3.1.1.1.           By Value  

6.3.1.2.        Market Share & Forecast

6.3.1.2.1.           By Aircraft Type Market Share Analysis

6.3.1.2.2.           By Component Market Share Analysis

6.3.1.2.3.           By Engine Type Market Share Analysis

6.3.2.    India Aeroengine Accessory Drive Train Market Outlook

6.3.2.1.        Market Size & Forecast

6.3.2.1.1.           By Value  

6.3.2.2.        Market Share & Forecast

6.3.2.2.1.           By Aircraft Type Market Share Analysis

6.3.2.2.2.           By Component Market Share Analysis

6.3.2.2.3.           By Engine Type Market Share Analysis

6.3.3.    Japan Aeroengine Accessory Drive Train Market Outlook

6.3.3.1.        Market Size & Forecast

6.3.3.1.1.           By Value  

6.3.3.2.        Market Share & Forecast

6.3.3.2.1.           By Aircraft Type Market Share Analysis

6.3.3.2.2.           By Component Market Share Analysis

6.3.3.2.3.           By Engine Type Market Share Analysis

6.3.4.    Indonesia Aeroengine Accessory Drive Train Market Outlook

6.3.4.1.        Market Size & Forecast

6.3.4.1.1.           By Value  

6.3.4.2.        Market Share & Forecast

6.3.4.2.1.           By Aircraft Type Market Share Analysis

6.3.4.2.2.           By Component Market Share Analysis

6.3.4.2.3.           By Engine Type Market Share Analysis

6.3.5.    Thailand Aeroengine Accessory Drive Train Market Outlook

6.3.5.1.        Market Size & Forecast

6.3.5.1.1.           By Value  

6.3.5.2.        Market Share & Forecast

6.3.5.2.1.           By Aircraft Type Market Share Analysis

6.3.5.2.2.           By Component Market Share Analysis

6.3.5.2.3.           By Engine Type Market Share Analysis

6.3.6.    South Korea Aeroengine Accessory Drive Train Market Outlook

6.3.6.1.        Market Size & Forecast

6.3.6.1.1.           By Value  

6.3.6.2.        Market Share & Forecast

6.3.6.2.1.           By Aircraft Type Market Share Analysis

6.3.6.2.2.           By Component Market Share Analysis

6.3.6.2.3.           By Engine Type Market Share Analysis

6.3.7.    Australia Aeroengine Accessory Drive Train Market Outlook

6.3.7.1.        Market Size & Forecast

6.3.7.1.1.           By Value  

6.3.7.2.        Market Share & Forecast

6.3.7.2.1.           By Aircraft Type Market Share Analysis

6.3.7.2.2.           By Component Market Share Analysis

6.3.7.2.3.           By Engine Type Market Share Analysis

7.    Europe & CIS Aeroengine Accessory Drive Train Market Outlook

7.1.  Market Size & Forecast

7.1.1.    By Value  

7.2.  Market Share & Forecast

7.2.1.    By Aircraft Type Market Share Analysis

7.2.2.    By Component Market Share Analysis

7.2.3.    By Engine Type Market Share Analysis

7.2.4.    By Country Market Share Analysis

7.2.4.1.        Germany Market Share Analysis

7.2.4.2.        Spain Market Share Analysis

7.2.4.3.        France Market Share Analysis

7.2.4.4.        Russia Market Share Analysis

7.2.4.5.        Italy Market Share Analysis

7.2.4.6.        United Kingdom Market Share Analysis

7.2.4.7.        Belgium Market Share Analysis

7.2.4.8.        Rest of Europe & CIS Market Share Analysis

7.3.  Europe & CIS: Country Analysis

7.3.1.    Germany Aeroengine Accessory Drive Train Market Outlook

7.3.1.1.        Market Size & Forecast

7.3.1.1.1.           By Value  

7.3.1.2.        Market Share & Forecast

7.3.1.2.1.           By Aircraft Type Market Share Analysis

7.3.1.2.2.           By Component Market Share Analysis

7.3.1.2.3.           By Engine Type Market Share Analysis

7.3.2.    Spain Aeroengine Accessory Drive Train Market Outlook

7.3.2.1.        Market Size & Forecast

7.3.2.1.1.           By Value  

7.3.2.2.        Market Share & Forecast

7.3.2.2.1.           By Aircraft Type Market Share Analysis

7.3.2.2.2.           By Component Market Share Analysis

7.3.2.2.3.           By Engine Type Market Share Analysis

7.3.3.    France Aeroengine Accessory Drive Train Market Outlook

7.3.3.1.        Market Size & Forecast

7.3.3.1.1.           By Value  

7.3.3.2.        Market Share & Forecast

7.3.3.2.1.           By Aircraft Type Market Share Analysis

7.3.3.2.2.           By Component Market Share Analysis

7.3.3.2.3.           By Engine Type Market Share Analysis

7.3.4.    Russia Aeroengine Accessory Drive Train Market Outlook

7.3.4.1.        Market Size & Forecast

7.3.4.1.1.           By Value  

7.3.4.2.        Market Share & Forecast

7.3.4.2.1.           By Aircraft Type Market Share Analysis

7.3.4.2.2.           By Component Market Share Analysis

7.3.4.2.3.           By Engine Type Market Share Analysis

7.3.5.    Italy Aeroengine Accessory Drive Train Market Outlook

7.3.5.1.        Market Size & Forecast

7.3.5.1.1.           By Value  

7.3.5.2.        Market Share & Forecast

7.3.5.2.1.           By Aircraft Type Market Share Analysis

7.3.5.2.2.           By Component Market Share Analysis

7.3.5.2.3.           By Engine Type Market Share Analysis

7.3.6.    United Kingdom Aeroengine Accessory Drive Train Market Outlook

7.3.6.1.        Market Size & Forecast

7.3.6.1.1.           By Value  

7.3.6.2.        Market Share & Forecast

7.3.6.2.1.           By Aircraft Type Market Share Analysis

7.3.6.2.2.           By Component Market Share Analysis

7.3.6.2.3.           By Engine Type Market Share Analysis

7.3.7.    Belgium Aeroengine Accessory Drive Train Market Outlook

7.3.7.1.        Market Size & Forecast

7.3.7.1.1.           By Value  

7.3.7.2.        Market Share & Forecast

7.3.7.2.1.           By Aircraft Type Market Share Analysis

7.3.7.2.2.           By Component Market Share Analysis

7.3.7.2.3.           By Engine Type Market Share Analysis

8.    North America Aeroengine Accessory Drive Train Market Outlook

8.1.  Market Size & Forecast

8.1.1.    By Value  

8.2.  Market Share & Forecast

8.2.1.    By Aircraft Type Market Share Analysis

8.2.2.    By Component Market Share Analysis

8.2.3.    By Engine Type Market Share Analysis

8.2.4.    By Country Market Share Analysis

8.2.4.1.        United States Market Share Analysis

8.2.4.2.        Mexico Market Share Analysis

8.2.4.3.        Canada Market Share Analysis

8.3.  North America: Country Analysis

8.3.1.    United States Aeroengine Accessory Drive Train Market Outlook

8.3.1.1.        Market Size & Forecast

8.3.1.1.1.           By Value  

8.3.1.2.        Market Share & Forecast

8.3.1.2.1.           By Aircraft Type Market Share Analysis

8.3.1.2.2.           By Component Market Share Analysis

8.3.1.2.3.           By Engine Type Market Share Analysis

8.3.2.    Mexico Aeroengine Accessory Drive Train Market Outlook

8.3.2.1.        Market Size & Forecast

8.3.2.1.1.           By Value  

8.3.2.2.        Market Share & Forecast

8.3.2.2.1.           By Aircraft Type Market Share Analysis

8.3.2.2.2.           By Component Market Share Analysis

8.3.2.2.3.           By Engine Type Market Share Analysis

8.3.3.    Canada Aeroengine Accessory Drive Train Market Outlook

8.3.3.1.        Market Size & Forecast

8.3.3.1.1.           By Value  

8.3.3.2.        Market Share & Forecast

8.3.3.2.1.           By Aircraft Type Market Share Analysis

8.3.3.2.2.           By Component Market Share Analysis

8.3.3.2.3.           By Engine Type Market Share Analysis

9.    South America Aeroengine Accessory Drive Train Market Outlook

9.1.  Market Size & Forecast

9.1.1.    By Value  

9.2.  Market Share & Forecast

9.2.1.    By Aircraft Type Market Share Analysis

9.2.2.    By Component Market Share Analysis

9.2.3.    By Engine Type Market Share Analysis

9.2.4.    By Country Market Share Analysis

9.2.4.1.        Brazil Market Share Analysis

9.2.4.2.        Argentina Market Share Analysis

9.2.4.3.        Colombia Market Share Analysis

9.2.4.4.        Rest of South America Market Share Analysis

9.3.  South America: Country Analysis

9.3.1.    Brazil Aeroengine Accessory Drive Train Market Outlook

9.3.1.1.        Market Size & Forecast

9.3.1.1.1.           By Value  

9.3.1.2.        Market Share & Forecast

9.3.1.2.1.           By Aircraft Type Market Share Analysis

9.3.1.2.2.           By Component Market Share Analysis

9.3.1.2.3.           By Engine Type Market Share Analysis

9.3.2.    Colombia Aeroengine Accessory Drive Train Market Outlook

9.3.2.1.        Market Size & Forecast

9.3.2.1.1.           By Value  

9.3.2.2.        Market Share & Forecast

9.3.2.2.1.           By Aircraft Type Market Share Analysis

9.3.2.2.2.           By Component Market Share Analysis

9.3.2.2.3.           By Engine Type Market Share Analysis

9.3.3.    Argentina Aeroengine Accessory Drive Train Market Outlook

9.3.3.1.        Market Size & Forecast

9.3.3.1.1.           By Value  

9.3.3.2.        Market Share & Forecast

9.3.3.2.1.           By Aircraft Type Market Share Analysis

9.3.3.2.2.           By Component Market Share Analysis

9.3.3.2.3.           By Engine Type Market Share Analysis

10.  Middle East & Africa Aeroengine Accessory Drive Train Market Outlook

10.1.            Market Size & Forecast

10.1.1. By Value   

10.2.            Market Share & Forecast

10.2.1. By Aircraft Type Market Share Analysis

10.2.2. By Component Market Share Analysis

10.2.3. By Engine Type Market Share Analysis

10.2.4. By Country Market Share Analysis

10.2.4.1.     South Africa Market Share Analysis

10.2.4.2.     Turkey Market Share Analysis

10.2.4.3.     Saudi Arabia Market Share Analysis

10.2.4.4.     UAE Market Share Analysis

10.2.4.5.     Rest of Middle East & Africa Market Share Analysis

10.3.            Middle East & Africa: Country Analysis

10.3.1. South Africa Aeroengine Accessory Drive Train Market Outlook

10.3.1.1.     Market Size & Forecast

10.3.1.1.1.         By Value  

10.3.1.2.     Market Share & Forecast

10.3.1.2.1.         By Aircraft Type Market Share Analysis

10.3.1.2.2.         By Component Market Share Analysis

10.3.1.2.3.         By Engine Type Market Share Analysis

10.3.2. Turkey Aeroengine Accessory Drive Train Market Outlook

10.3.2.1.     Market Size & Forecast

10.3.2.1.1.         By Value  

10.3.2.2.     Market Share & Forecast

10.3.2.2.1.         By Aircraft Type Market Share Analysis

10.3.2.2.2.         By Component Market Share Analysis

10.3.2.2.3.         By Engine Type Market Share Analysis

10.3.3. Saudi Arabia Aeroengine Accessory Drive Train Market Outlook

10.3.3.1.     Market Size & Forecast

10.3.3.1.1.         By Value  

10.3.3.2.     Market Share & Forecast

10.3.3.2.1.         By Aircraft Type Market Share Analysis

10.3.3.2.2.         By Component Market Share Analysis

10.3.3.2.3.         By Engine Type Market Share Analysis

10.3.4. UAE Aeroengine Accessory Drive Train Market Outlook

10.3.4.1.     Market Size & Forecast

10.3.4.1.1.         By Value  

10.3.4.2.     Market Share & Forecast

10.3.4.2.1.         By Aircraft Type Market Share Analysis

10.3.4.2.2.         By Component Market Share Analysis

10.3.4.2.3.         By Engine Type Market Share Analysis

11.  SWOT Analysis

11.1.            Strength

11.2.            Weakness

11.3.            Opportunities

11.4.            Threats

12.  Market Dynamics

12.1.            Market Drivers

12.2.            Market Challenges

13.  Market Trends and Developments

14.  Competitive Landscape

14.1.            Company Profiles (Up to 10 Major Companies)

14.1.1. GE Avio Srl (General Electric Company)

14.1.1.1.     Company Details

14.1.1.2.     Key Product Offered

14.1.1.3.     Financials (As Per Availability)

14.1.1.4.     Recent Developments

14.1.1.5.     Key Management Personnel

14.1.2. BMT Aerospace International NV

14.1.2.1.     Company Details

14.1.2.2.     Key Product Offered

14.1.2.3.     Financials (As Per Availability)

14.1.2.4.     Recent Developments

14.1.2.5.     Key Management Personnel

14.1.3. Liebherr-International Deutschland GmbH

14.1.3.1.     Company Details

14.1.3.2.     Key Product Offered

14.1.3.3.     Financials (As Per Availability)

14.1.3.4.     Recent Developments

14.1.3.5.     Key Management Personnel

14.1.4. AB SKF

14.1.4.1.     Company Details

14.1.4.2.     Key Product Offered

14.1.4.3.     Financials (As Per Availability)

14.1.4.4.     Recent Developments

14.1.4.5.     Key Management Personnel

14.1.5. Safran SA

14.1.5.1.     Company Details

14.1.5.2.     Key Product Offered

14.1.5.3.     Financials (As Per Availability)

14.1.5.4.     Recent Developments

14.1.5.5.     Key Management Personnel

14.1.6. The Timken Company

14.1.6.1.     Company Details

14.1.6.2.     Key Product Offered

14.1.6.3.     Financials (As Per Availability)

14.1.6.4.     Recent Developments

14.1.6.5.     Key Management Personnel

14.1.7. Triumph Group Inc.

14.1.7.1.     Company Details

14.1.7.2.     Key Product Offered

14.1.7.3.     Financials (As Per Availability)

14.1.7.4.     Recent Developments

14.1.7.5.     Key Management Personnel

14.1.8. RTX Corporation

14.1.8.1.     Company Details

14.1.8.2.     Key Product Offered

14.1.8.3.     Financials (As Per Availability)

14.1.8.4.     Recent Developments

14.1.8.5.     Key Management Personnel

15.  Strategic Recommendations

15.1.            Key Focus Areas

15.1.1. Target Regions

15.1.2. Target Component

15.1.3. Target By Aircraft Type

16.  About Us & Disclaimer

Figures and Tables

Frequently asked questions

down-arrow

The market size of the Global Aeroengine Accessory Drive Train Market was estimated to be USD 1.2 billion in 2023.

down-arrow

In 2023, General Aviation emerged as the fastest growing segment by aircraft type in the Global Aeroengine Accessory Drive Train Market. This segment's growth reflects the sustained demand for accessory drive train components in various general aviation applications, including light aircraft, business jets, and helicopters.

down-arrow

North America holds a significant share in the Global Aeroengine Accessory Drive Train Market due to its robust aerospace industry, it would be inaccurate to label it as the sole dominant region. Other regions like Europe and Asia Pacific also play vital roles in the market, contributing to its overall growth and development.

down-arrow

The major drivers for the Global Aeroengine Accessory Drive Train Market include the increasing demand for fuel-efficient aircraft, advancements in engine technology requiring more efficient accessory drive systems, and the growth of the aviation industry driven by rising air passenger traffic worldwide.

profile

Srishti Verma

Business Consultant
Press Release

Aeroengine Accessory Drive Train Market to Grow 7.54% CAGR through to 2029

May, 2024

Technological advancements, increasing aircraft modernization efforts, and the rise of the defense sector are the factors driving the global aeroengine accessory drive train market in the forecast pe